Wildcard SSL Certificate Request
I would like to install a wildcard certificate on the loadmasters for *.domain.com. What format do I have to use for the certificate request to send the request off to Entrust?
View ArticleStatus of VIPs
How do people get the status of their VS/Real Servers into their monitoring systems?We were trying to have a look at the RestfulAPI to see if we can get the status of a VS and RS but other than them...
View ArticleVLM HA Issue
Hi Guys, I've encountered a few similar issues everytime I setup a VLM HA cluster.Below is the description:- Upon setup the 2nd node of the VLM, after retrieving configuration from the HA partner, I...
View ArticleHA Issue
Hi Support, I've encounter on few occasion that my VLM nodes will attempt to turn themselves to MASTER in HA mode.Both of them are connected to the same network and able to setup properly with shared...
View ArticleWhat does "kernel: L7: Decode time failed " mean?
This message (kernel: L7: Decode time failed) shows up intermittently in our logs. Any idea what it means?
View ArticleFTP how to?
Hi Guys,I'm trying to install FTP services with VLM vers 7.0.8.here is a description :2 real servers : ftp1.domain.com (IP1: 192.168.1.X ) and ftp2.domain.com( IP2:192.168.1.Y)Both are running on...
View ArticleSSL connection taking longer time
Hi All,We have a problem about SSL connection on KEMP...We used LM-2200 (HA-mode)actually, i'm gonna try to tell you all my problem in KEMP configuration,At the first, we found a problem that the web...
View ArticleLoad balancing application pools IIS 7.5
Hi,I have 3 instances on 2 real servers, LIVE, TEST and TRAIN. They all use .NET 4 and are in different app pools respectively named.I have managed to setup load balancing on LIVE app pool by having...
View ArticleHA Configuration
Hi AllI have a question about the HA configuration on a pair of LM 2200's. We have a straight through piece of CAT5e between eth1 on both devices dedicated to the HA heartbeat traffic, however we have...
View Articlewarning log e-mail
Hello,I have received 2 warning e-mail from my kemp load balancer:Oct 19 07:29:04 KEMP1 kernel: net_ratelimit: 10 callbacks suppressedOct 21 14:00:01 KEMP1 checkproc: checkproc: xread error: No such...
View ArticleVLM1000 Max Ethernet Interfaces
Hi,A fifth ethernet interface that I added to the virtual machine is not showing up in the GUI. How many interfaces does the VLM1000 support?ThanksMarcel
View ArticleESP and OWA, session timeouts
Exchange 2010 loadbalanced with two LM2600, version 7.0-8a.When user logs on through ESP they can work in OWA but, after 5-10 minutes it seems to timeout.It doesnt logoff like manually it shows the...
View ArticleDoes Load Master supports connection mirroring in HA configuration
Hello everyone, I would like to know if the KEMP Load master supports connection mirroring in comparison to F5, where if the active box fails the and the users access teh virtual servers through the...
View ArticleCAS Proxying
Hi,We have 4 Client Access Servers, split 2 per site (let's say site A and site B). 2 of these CA servers are on the same site as the LM (site A), which has a virtual service configured for HTTPS with...
View ArticleExchange 2010, Kemp and OS X
Hi,I have had a strange problem using KEMP LM's, Exchange 2010 and OS X 10.8. Every client configuration I have tried works, OWA, Outlook 2010/2003 and Outlook 2011 for Mac. The only one that refused...
View ArticleDefault Gateway
Hi,is it possible to have one different "default Gateway" for each eth on LM, or do i have to set additional routes?Kind Regardsmwerner
View ArticleSSL Certificates Randomly Stop working
Good Morning, for the last year or so we have had"bizarre" SSL cert issues with the loadmaster. First on the LM 2200 then the virtual LM andnow on our 2600 and we just performed a firmware upgrade to...
View ArticleClik here to view.
Kemp ESP/OWA public vs private
Hi AllWe are currently using ISA 2006 to provide OWA and Activesync and are looking to replace this with ESP. This is currently configured and working quite well.On the login page for OWA through...
View ArticleEnable Detect Malicious Requests REST API
Checking the last API (v 2.1) I didn't found any method to enable the functionality of Detect Malicious Requests and choose an intrusion handling for a virtual service, so do you have support to work...
View ArticleKemp ESP + Exchange 2013 + Windows XP + Outlook Anywhere = Password Prompts?
Hey all,We're in the stages of rolling out Exchange 2013 for a customer and are running into an issue with a particular scenario.If we have a Windows XP machine -> Kemp ESP (Outlook Anywhere with...
View Article