hi
i have 1 lm-2200 configured with standard exchange 2010 template with 2x real cas/hub servers
with following timeout and l7 connections setup
Drop Connections on RS failure
Drop at Drain Time End
L7 Connection Drain Time (secs) 300 secs
persistence option 1 hour
Idle Connection Timeout 86400 secs
when i disable 1 server (ukcas00) the connections seem to stop immediately on ukcas00i notice the following statistics
the active connections remain at 18 but there is no data flowing, can i safely take this uk-cas00 server out of action. when does the active connections drop to 0?
1⇒ (uk-cas01) 10.3.2.228 Up 20113 8 53 251 479 43 0 0
2⇒ (uk-cas00) 10.3.2.238 Disabled 22017 0 0 0 0 18 0 0
2 System Total Conns 42130 8 53 251 479 61 0 /sec
i have 1 lm-2200 configured with standard exchange 2010 template with 2x real cas/hub servers
with following timeout and l7 connections setup
Drop Connections on RS failure
Drop at Drain Time End
L7 Connection Drain Time (secs) 300 secs
persistence option 1 hour
Idle Connection Timeout 86400 secs
when i disable 1 server (ukcas00) the connections seem to stop immediately on ukcas00i notice the following statistics
the active connections remain at 18 but there is no data flowing, can i safely take this uk-cas00 server out of action. when does the active connections drop to 0?
1⇒ (uk-cas01) 10.3.2.228 Up 20113 8 53 251 479 43 0 0
2⇒ (uk-cas00) 10.3.2.238 Disabled 22017 0 0 0 0 18 0 0
2 System Total Conns 42130 8 53 251 479 61 0 /sec